Contact Us
| These really look nice on the bike and are very easy and quick to install. Would recommend the other side chrome pieces (frame covers, scuff guards, etc) to round out the side of the Wing. |
| These are nice, heavy end caps. I have the ISO grips that install over the heated grips and thought these would add a nice touch. However, after installing them I just didn't think they looked right on the Goldwing so I removed them. Just my personal taste and nothing against the product. |
| Very nice product. Heavy duty and very easy to install. The whole process takes just a few minutes and it adds a nice touch, especially when used with the chrome cowl. The do recommend starting the bike and allowing it to idle at normal operating temperature for 5 minutes so make sure you allow time for that during the install. |
| After receiving this product, I opened the box to find a notice from the company saying that they would not be responsible for any product defect, damage, etc. Then I pulled out the Cowl and found that it was broken right in the middle of the thin top piece. After thinking about returning it, regardless of the company's warning, I decided to go ahead and install it, since the piece that was broken would be covered and bolts would go on either side to hold it anyway. After installation, the cowl looks good and the fit was good. Take some time removing the fog light covers if you have lights installed so as to not leave any ugly, jagged edges. If I had to do it over again, I would probably go with a different cowl, like the Hondaline, due to the fact that if a company won't stand behind it's product, then it's not a product I want to purchase. Ride Safe! |
| Not so usable as it looks like. |
| Good product and finish. I opted to replace with a single post style as wife likes more room for her legs. If you would like to save a few bucks drop me and e-mail and I will give you a deal |
|
This little review is to tell everyone that is considering getting these floorboards GET THEM they are better than I expected them to be, installation was breeze, and they look as good as they work, and they compliment all the other Kuryakn chrome products I have on my Wing. Thanks as always. Jeff and Debbie Scilder |
| So far so good they make loading our bikes and tying them dowm a breeze. We have put them to the test with our Wing and our VLX 600 |
| After 5 Minutes using it, I don't know why this wasn't the first thing purchased for my Goldwing. I'm stupid I guess. Easy to install (About 30 min). I'm a small guy. I LOVE it, my body loves it, You need it. Any Questions? No--good, get it. |
| a must have item. very detailed and easy to follow. |
| These are very sturdy pegs with solid, positive arm and peg rotation adjustment settings, not friction-based set-and-tighten. That's the upside. Downside is the arm can only be set every 45 degrees, which means the only positions below horizontal are -45 and -90 degrees, both unsafe when cornering. A slight downward tilt, like 22.5 degrees, would be great, but is not available. For those with long legs, the pegs are too close and too high, which means you must buy item KU4071, the mini-arms for Ergo II, another $50. Do it, it's worth it. BTW if you're considering item KU4071, the short pegs with friction setting -- which would save you $90 over the Ergo II + mini-arms -- don't bother. The right side peg slips under even mild foot pressure unless you use split lock washers and have it torqued down by a real gorilla. I'm 6'6", 335 lbs, and it took all my strength with a 15" breaker bar, plus Loctite, to get the 1/2" x 13 pivot bolt to stay put. Almost stripped the threads. And after all that, their location forces the fairing edge deep into your lower leg. I literally threw mine in the trash after 6 months of dissatisfaction. Get the Ergo II's instead. You'll be glad you did. |
| these look great on the faring and adds a nice touch.I chose these because i didn,t want to much chrome in that area of my goldwing.Not hard to install,you just to leave overnite for glue to dry. |