Contact Us
|
Great Product. We had noticed a decrease in the running light intensity especially when stopped. Bike now runs like new. Highly recommend. DOC |
| I find this product works very well to move my bike against a wall for space or to move around for any reason. The BIG problem I have with this is that I can't get the bike to come off the center stand when on this dolly !! Doesn't matter if I am sitting on it, or standing beside it, this dolly slides with each attempt to get the bike off the center stand. The video makes it look easy, but I just can't get the wheels to lock well enough to allow my bike to come down. I experimented with various tensions of the wheel nuts adjusting them to the point where I have to use pliers to move the lock....but this didn't make a difference either. I will say that I do have a epoxy garage floor so this might be the problem. Either way tho...this dolly should have a better way of locking so the bike will release. I called the company and they said they have had many calls about this issue, but they have no solution to this problem. I will gladly adjust my review to 5 stars if this problem is addressed. |
| Easy install and pleased like other buyers on here. |
|
Like other reviewers, wish this was standard from factory but was a great addition to the bike. There's an awesome video to help with easy install I linked below. If link does not work search "Goldwing Accessory Socket Kit Installation" and will come up. https://youtu.be/COuTOlXT0tU |
| Awesome addition to the wing, nice to not have it fall in drain pan. |
| Great product, always change my crush washer! |
| Maybe I'm mechanically dumb, but not very impressed with the wrench. There's a lot going on in that part of the wing and think unless I removed the cowl would not be very useful...I sure could not have removed the filter using this wrench. There's a lot of inexpensive alternatives that would be better for them to ship with this package. Based on price of wrench on this website by itself, $11, I'd say that part of package was a waste of money. My FRAM wrenches I bought are much better. |
| Very unimpressed with the overall quality of the instructions from Baker Built. For several hundred dollars for a full set it's inconceivable that the instructions would be SO POOR. I have an '07 comfort model and while there is ZERO indication this is a problem in the website description (this one or Baker Built) OR the poor instructions I take it from the previous reviewers I will only be able to use the front bracket and one of the two rear brackets? Pretty poor for a $65 piece of plastic. |
| I gave it 4 stars because this should have been standard from the factory. Installation was simple. Drill at the x. Plug and play (at least on my 2012). Great directions. Was kinda bummed that it only had a 3 amp fuse. Can't really use it to charge your battery. Hopefully I'll find something to plug into it. |
| This is a great bag for the price and is quite a step above the usual helmet bag that most helmets are shipped with. Love the handles. |
| Ordered the black one. Placed it in the fork well as others have. Did not have a problem with the numbers coming off. Did have problems finding something to wire it to as all the wires in the left pocket container were wrapped in electrical tape. Finally just spliced the two wires into the 2 wires of the accessory plug. I like being able to keep track of the charge of my battery as well as the charging system of my bike and this piece does the trick perfectly. Can't believe Honda didn't place a battery meter on the instrument panel. Oh well. |
|
I bought this because I traded my Electraglide in for the Wing and loved the heel toe shifter. I also don't like scuffing my boot toe. I chose not to go for floorboards because my riding position on the Wing places my feet a litte more to the rear than the Electraglide and I find it more comfortable to point my toes down slightly on the foot pegs. This kit solved my dilemma. The installation was simple and involved taking the old footpeg plate of and replacing it with the Kuryakyn plate with the shifter mounted onto it. It was a tight fit to get to one of the hex head screws so I did put several pieces of black electrical tape on the shifter to keep from marring it. My only complaint with this setup is that it's rather cramped shifting the toe as the shifter actually sits on top of the old shifter and as you can see it's right up against the rear of the valve cover. Now that I have been using it this doesn't seem to be a problem anymore. All in all, I love this product and am very happy with the quality of the shifter as I have been with most of Kuryakyn's products. |