Contact Us
|
So I'm about to change my bulbs over to LED's and my only question is, why would you NOT want your turn signals to flash faster? Wouldn't that just get peoples attention better? Will having them flash faster hurt the LED bulbs or your Goldwing at all? Thanks for letting me know. Sgt Charlie |
| I installed this on my 2012 Wing! And man this thing looks so good on the front fender! I had it done down at Daytona 2013, I was having other things installed by Kury at the show and added this to the list! It's a great looking piece. I had the spear one insalled and they removed that and added this one and it looks really good! Get it! It adds a whole lot of something to front of your bike.. |
| I had this installed on my bike at Daytona 2013, I was having some other things installed by Kury and for 35.00 they will install all that you buy that day. So I had them add this and all I can say is do it! It's really bright during the day but at night it's like a becon! Installed on a 2012 Wing! |
|
Solid hitch and the wirring harness went well. But it should be noted Add On tech.support was not aware of the bracket that had to be removed on the tail light assembly on my 2012. I sent him pictures to clarify he said he would be consulting the Honda design folks to see why it is on some 2012 but not all Once we figured out how to re mount the harness it was easy to remedy I would recommend this hitch but wish they had clearer instructions as to the extent of the items that are required to be removed to accomodate the installation |
| I just installed this on my 2008 wing. Taking the EOM cover off was pretty easy but don't forget to pull the threaded tabs off the two top outside tabs and install on the new part. Getting this piece to fit properly was not easy. I had to push pretty hard with one hand while trying to get the screws started with the other. As far as looks go, I give this 5 stars. But I give it 3 stars due to difficulty to install, so that averages out to a 4 star rating. A little overprices given this is just a piece of plastic that probably costs $10 to make. |
| The shipping was fast. Just installed the windshield it was a great fit but after the install you can see the velcro strip at the top from the front of the bike.Need to be tinted. Will let you know how it helps behind it when the snow is off the roads. |
|
I got these on my used Wing at time of purchase. I had doubts if they were of any use and was contemplating removing them. Then I rode my 'new to me' Wing and I was amazed! Much of my riding is in cold weather and they make an amazing difference, so much so I wont' even bother to get heated grips. I had heated grips on my K1200LT and it left the tops of my hands/fingers cold but with these airwings deflecting the cold air away from my hands, my entire hands are warm. On occasion when it does get hot, you merely twist them and they funnel a lot of air into your still air cockpit to help alleviate the heat...amazing how much air you can move onto your upper body to keep you a bit cooler. |
|
I got this to replace the original cover here on my Wing that the previous owner had mounted something to (left 4 holes behind). Why this is a great product: 1. Very easy to install. 2. Plug and play. 3. Perfect OEM fit & finish. 4. Voltmeter is very functional and accurate. 5. Looks classy and is lit up/visible at night. Another item that you have to wonder why it isn't OEM from the factory? |
| It's an alloy that isn't as strong as the OEM. Don't put on with recommended torque or you'll never get it off and the metal just shears off! After my break in oil change I addeded this plug wanting the protection and piece of ming of the magnetic feature. Bad decision on my part I assure you. Some two hours later I got it out and in the trash it went! Also, they compromised on the bolt size (13mm v. 17mm), making it even more difficult to get ahold of it to remove. Believe me, I found out the hard way! |
| The 2012 goldwings dont come with the plug so why pay Honda to add it. This one is longer than the Honda part so if you want to route this to the trunk there is plenty of cable. |
| This is as basic as it gets. I used this to add a volt meter to my right hand side of the bike. Pluged into left side plug under pocket perfect length to right side of cowl for my added Volt meter. |
| Easy insatll drill a hole, snap into place and plug it in. About 5 min. It looks as good as the Honda part and fits the same place. |