Contact Us
| Was fairly easy to put on! Protects the fob and the gas tank! Why not? Well worth the cost! |
|
Holy Frig! Louder than I thought they'd be. Look gorgeous on the F6B and sound pretty darned good to boot. Enjoy! |
| Installed late last night, rode to work with no engine heat on my legs and feet. Ran a few errands and got caught in the rain. Yes, the reviewer below is correct... my feet were dry! I cannot say the same for the rest of my body. |
| Very nice addition, easy install. Make sure you order the appropriate wiring adapter as stated in product description. |
| I came home during lunch and saw the package at the front door. Installed in minutes, grabbed a bite to eat and went back to work. I almost did not make it back to work in time because I was enjoying the smooth ride. This is a must have product, glad I added it! |
| very nice looking also got the chrome spring. very stout. easy install only took five minutes. when installing the spring make a small loop with twine attach the top of the spring and hook the loop of the twine to the lower part of the spring and pull until you can get the spring over the hook on the kickstand takes little effort then just cut the twine and remove. |
| I finally found a device that can hold my smart phone mini computer. The 4 stars is for the missing washers and nuts I had to go buy from the local hardware store because the package I received was missing them. I did not feel like requesting for a RMA, $1 spent for missing items and I am good to go. |
|
Worked fine when I installed it but on I40, west of Tucumcari, New Mexico I accelerated from 65 to 72 and said to my wife "What smells like burned rubber?" I pulled over to the side of the road and there was rubber spattered on the front of my trailer and everything behind the rear wheel which was flat. Fast forward to the Honda shop in Albuquerque and the mechanic replaced the tire because it was destroyed. He told me that the valve stem was cracked, probably by the extra weight of the pressure sensor on the right angle valve stem on my Goldwing rear wheel. We hadn't gone 10 miles from Tucumcari and that at 60 to 65 mph. The tire was new before we left Wisconsin about a week earlier and the pressure was good 10 miles back. Needless to say, the TPMS came of and went back in the box. I wouldn't recommend using it on a right angle valve stem and therefore not on a Goldwing at all. |
| Smoothed out the ride, and really works. Only regret, I bought them before they went on sale. Easy install as long as you are slightly mechanical. Wish I could find some for other bikes also. |
|
This product seemed difficult to instal until you learn to bend the product slightly and it goes is easy. I purchased this about a year ago, and after removing the front plate three times to change my oil, one nut on the front section fell off. The next oil change, the other nut fell off, so now I am left with the most critical part of m bike exposed. I will try to do a RMA, but I expect this to be past warranty. If you have this belly pan, make sure NOT to over tighten the screws at all, and even then good luck. |
| I have had this on my bike for a year now. I was concerned because some people had mentioned the chrome wasn't good and had rust/flaking. I can tell you that it still looks great. Before I installed it I put a coat of wax on it and I have had no problems with the finish. The appearance is good and I think it looks nice on my bike. The welds all look good as well. I would recommend this to a friend. |
| I have one of these for me and one for my wife. They work perfectly. I've used them since 2012. If you break the pins in the plugs it will stop working correctly so don't jam it in or yank it out and it will serve you well. |