Contact Us
Lorne
Drayton Valley, CA, T7A1B1
Review
Comments
Wish Lists
Alias:
Lorne
About:
- Nothing entered yet -
Occupation:
- Nothing entered yet -
Favorite Quote:
- Nothing entered yet -
Member Since:
07.19.2014
Bike 1:
- No Bike 1 -
Bike 2:
- No Bike 2 -
Bike 3:
- No Bike 3 -
Lorne has not yet added any pictures.
Lorne has not yet written any comments.
Performance Stainless Belly Pan
ITEM CODE: WS187416, SKU: WS187416
08.28.2014
Belly Pan for GL1800
| I ordered this product for my 2009 Honda Goldwing GL1800. 1. Make sure you take off the white plastic coverings on both sides before installing. 2. Before installing I took mine to a local company and had them powder coat it to match the grey cowling color for a cost of $80 US. So glad I did as it comes back with smoother edges and should add many more years of wear to it. 3. Installing it took me approx. 90 minutes. Install the kickstand side first, taking out the side bolts with a 10 mm socket wrench. It may take some effort to get the pan hole over the bolt and inside the cowelling. Put nuts in place and lightly tighten. 4. Then do the same on the right side. With a little persistence it will go into place. Then tighten all four bolts. 5. Put on the front portion last. You'll have to bend it in shape to get a better fit. Then 1/4 tighten lug nuts. Tip: I used a piece of chrome car door plastic edging along both the front edge of the front piece to reduce rattling and along the back edge of the back piece for a smoother look. A great product. Like everyone else says it should have been installed at the factory. Thanks Wingstuff for making it available. Should be purchased by all Goldwing owners. |
Lorne does not have any wish lists.