TOP REVIEWED
-
ISO-Grips for use w/OEM Heated Grips for GL1800
By Kuryakyn SKU: KU6183
- $115.10Save $12.85
MSRP: $127.95
-
-
-
Your Bike
Will this fit your bike?
-
Related Items
223 Member Reviews
1 Star: 15
2 Stars: 9
3 Stars: 28
4 Stars: 35
5 Stars: 136
ISO-Grips for use w/OEM Heated Grips for GL1800
ITEM CODE: KU6183, SKU: KU6183
10.14.2007
4 Stars
Nice grips. Allows an easier throttle response now that you have a larger diameter to turn. Heat transfers pretty well. Was not sure if it would, but it does. Start bike and leave on high for few minutes before you head out. "Hold the heat in" once you ride. |
ISO-Grips for use w/OEM Heated Grips for GL1800
ITEM CODE: KU6183, SKU: KU6183
09.04.2007
2 Stars
The grips look good and feel good but the rubber pads keep popping out on the ends and I find myself sitting at trafic lights trying to tuck them back inn. The left side is the worst because of trying to stand the bike off the kick stand. Kuryakyn needs to do better product testing b-4 releaseing to public. |
ISO-Grips for use w/OEM Heated Grips for GL1800
ITEM CODE: KU6183, SKU: KU6183
08.29.2007
3 Stars
I has the same problems that several others have with both the tape and the cam lock. Very poor instructions. I love the look and feel of the grips but the installation was the pits. |
ISO-Grips for use w/OEM Heated Grips for GL1800
ITEM CODE: KU6183, SKU: KU6183
08.26.2007
3 Stars
Adhesive tape is useless. The instructions say to rub one side to activate it but which side? I chose the easy side first but despite having cleaned the OEM grips it only just stuck. The tape was then so stuck to the other backing piece I have to remove it completely to get that off. Needs much more thought. Once the tape was worked out the right (throttle) grip went on real easy but the left one was a pain. I got the cam in the right position, but every time I did the end bolt up the two halves sprang apart again. Had to remove them to work out what was wrong. One half was trying to squeeze up on the other (at the cam end) the result being it was trying to bend the grips. Fixed it by sawing a washer in half and sticking that in the gap. A right pain to install properly. Haven't ridden with them yet but they're huge. Kuryakyn, listen up please. I have more problems with your products than anyone else. |
ISO-Grips for use w/OEM Heated Grips for GL1800
ITEM CODE: KU6183, SKU: KU6183
08.08.2007
4 Stars
These grips look and feel great & are a big improvement over the stock grips. However, the corners of the black rubber pads have a tendency to pull loose. Its a pain, but they are easy enough to reinsert. Kuryakyn is still "looking into the problem." |
ISO-Grips for use w/OEM Heated Grips for GL1800
ITEM CODE: KU6183, SKU: KU6183
08.01.2007
5 Stars
well i am gald that i read the reviews before i order them ,so I put the left side on 1st.I had the same problem has some of the others,so this is what needs to be done ,take the bar end weight that you took off in step 2 and on the left side push it back in the grip and turn it until you line up the cam that is in it so it will line up with the new grip,it will turn. before you put on the tape make sure it will fit right if not ajust it some more until it will. |
ISO-Grips for use w/OEM Heated Grips for GL1800
ITEM CODE: KU6183, SKU: KU6183
07.31.2007
3 Stars
first of all, the instructions are not very clear. Tells you to identify the right and left front and back, but they are unmarked. I finally got them on and they fit good. But man are these suckers BIG I wear XXL gloves and they are too big for me/ i am not sure if I will keep them. Taking a weekend ride and will see if I get used to them. Also very slick in the rain. |
ISO-Grips for use w/OEM Heated Grips for GL1800
ITEM CODE: KU6183, SKU: KU6183
06.25.2007
3 Stars
When I tried to install them the right grip installed very well. The left side kicked my butt trying to use the cam that was supposed to be installed. I could not get the grips to fit correctly. After fighting with them for awhile I noticed the tape had no adhesive left on them either, so I took them back to the Dealer and asked them to see if they could get the grips to fit correctly. I told them that I could not squeeze them together to get a tight fit. Well to make a long story short...they tried it and could not do it. They ended up removing the cam and retaping the grips and then they fit perfectly. Kuryakyn needs to redo their instructions to eliminate the cam. They will install easily once you know not to use it. |
ISO-Grips for use w/OEM Heated Grips for GL1800
ITEM CODE: KU6183, SKU: KU6183
06.24.2007
1 Stars
WASTE OF MONEY UNLESS YOU HAVE HANDS LIKE KING KONG. RIGHT-LEFT? HOW ABOUT THROTTLE AND CLUCH SIDE. ADHESIVE IS JUNK. TOOK THEM OFF AND PUT INTO THE WASTE OF MONEY DRAWER. HAVE TO WAIT UNTIL THE NEW & IMPROVED MODEL. LOVED THEM ON MY 1500. |
ISO-Grips for use w/OEM Heated Grips for GL1800
ITEM CODE: KU6183, SKU: KU6183
06.20.2007
4 Stars
I think the product make the bike look a lot better. I didn't put the cam in the fit was tight should not need the cam to keep it from rotating. The direction are misleading right and left should be clutch or throdle sides. If I do need the cam I hope that I will be able to get them apart. They do fit very well. |
ISO-Grips for use w/OEM Heated Grips for GL1800
ITEM CODE: KU6183, SKU: KU6183
06.18.2007
5 Stars
i really do not know why everyone is unhappy with this product...installed the way the directions advised...have heat, no extra glue, feel comfortable...stay where they supposed to....love the large grips and added a throttle boss |
ISO-Grips for use w/OEM Heated Grips for GL1800
ITEM CODE: KU6183, SKU: KU6183
06.09.2007
1 Stars
My experience is like many of these: the adhesive was junk and the rubber keeps coming out of the housing. I used these for 1500 miles and had to work the rubber back into the housing on about every stop. I am very disappointed that Kuryakyn turned out a product like this. |