-
Waterproof Lighted Volt Meter
By Honda SKU: HO37453ZW5000ZA
- $69.99Save $9.96
MSRP: $79.95
-
-
-
Your Bike
Will this fit your bike?
-
53 Member Reviews
1 Star: 0
2 Stars: 3
3 Stars: 4
4 Stars: 4
5 Stars: 42
Waterproof Lighted Volt Meter
ITEM CODE: HO37453ZW5000ZA, SKU: HO37453ZW5000ZA
03.13.2008
5 Stars
This should be a standard item on any Goldwing ,Easy install took 1/2 hour and is a must to keep an eye on your charging system ... |
Waterproof Lighted Volt Meter
ITEM CODE: HO37453ZW5000ZA, SKU: HO37453ZW5000ZA
02.22.2008
5 Stars
I received my voltmeter today and installed it. It took about an hour to get it fully installed, included drilling and reassembling panel. The plug for the meter is directly to the left. Initially, I thought it was the big white plug, but it is a single red plug under a rubber cover, about 2 inches to the left and beside the big white plug. Easy to plug in and install. Works perfectly and exactly as the instructions says. Red light, rather than a white light, is strange, but it works and is very visible at night and in day time. Maybe the red light is better to read it during the day. Runs when ignition is on and on ACC mode. |
Waterproof Lighted Volt Meter
ITEM CODE: HO37453ZW5000ZA, SKU: HO37453ZW5000ZA
02.17.2008
5 Stars
I ordered this meter yesterday. I read all of the product reviews and found many people had problems finding the electrical connector. So, I immediately went out and took my right fairing box key cover off. After much search all over the place under the right hand connector box, I was almost ready to give up and cancel my order. THEN: to the left side, toward the ignition key, of the key cover panel was the connector. In plain sight and ready to plug into. It is a 1 inch square connector with several plug ins available, white in color. It is there on my 2006, so it should be there for all 2006-2008 models. You don't even have to take the right hand fairing box off, just take off the key lock panel, cut the hole in it, insert and plug in the meter and it should be ready. I will update on it after I get my meter delivered, hopefully in about a week. |
Waterproof Lighted Volt Meter
ITEM CODE: HO37453ZW5000ZA, SKU: HO37453ZW5000ZA
02.11.2008
5 Stars
Perfect OEM looking item and a must have. Easy to install and wireing plug is right behind panel, red 3 pin plug. I love the red light, much like aircraft lighting red does not hinder night vision/ I also installed heated grips and they connected to back of volt gauge saving running wires to battery. With addition of PIAA lights, and grips and other accessories on this gauge tells true story of power output and useage in real time. A must have on any bike, but even more so when additional electrical accessories are added. |
Waterproof Lighted Volt Meter
ITEM CODE: HO37453ZW5000ZA, SKU: HO37453ZW5000ZA
02.11.2008
5 Stars
agree with others a must need for the bike. I can't believe this is not standard equipment. Was easy to install less than a hour. |
Waterproof Lighted Volt Meter
ITEM CODE: HO37453ZW5000ZA, SKU: HO37453ZW5000ZA
01.31.2008
5 Stars
A big thank you to Nate for his great instruction on installing this item. Took a longer than expected but it works & look great! The Honda instructions are generic & incorrect for the drilling. Thanks again Nate. |
Waterproof Lighted Volt Meter
ITEM CODE: HO37453ZW5000ZA, SKU: HO37453ZW5000ZA
12.21.2007
5 Stars
Easy install. Looks factory. Peace of mind on trips. The factory wire connection is hard to find up under the right speaker. It.s just out of reach but it's there. Have patients and you'll find it after moving the rubber trim from the mirror mount. |
Waterproof Lighted Volt Meter
ITEM CODE: HO37453ZW5000ZA, SKU: HO37453ZW5000ZA
09.27.2007
5 Stars
Very easy to install and looks factory except the red light at night. Why not white to match the other instrument gauges?? It does perform the intended purpose - peace of mind. |
Waterproof Lighted Volt Meter
ITEM CODE: HO37453ZW5000ZA, SKU: HO37453ZW5000ZA
08.29.2007
5 Stars
Easy install. Its nice to have a way of monitoring the battery charge. Should be standard equipment on a touring bike. |
Waterproof Lighted Volt Meter
ITEM CODE: HO37453ZW5000ZA, SKU: HO37453ZW5000ZA
07.28.2007
5 Stars
Very easy to install.. you do need to run your own 12V on the 07. I didnt find an oem connector under the right pocket on my 07.. Still easy to do, looks & functions perfectly.. I got the entire panel so all I had to do was swap the lock..EZ EZ EZ |
Waterproof Lighted Volt Meter
ITEM CODE: HO37453ZW5000ZA, SKU: HO37453ZW5000ZA
05.26.2007
5 Stars
A breeze to install, looks factory and now I can keep an eye on my charging system. We do a lot of long trips and this gives peace of mind. If I had it to do over I would definitely buy this again. |
Waterproof Lighted Volt Meter
ITEM CODE: HO37453ZW5000ZA, SKU: HO37453ZW5000ZA
04.14.2007
5 Stars
This is a top quality Hondaline Marine voltmeter. However, installation instructions are practially zero. Here is how it is done for a 2001-2005 Goldwing. 1. Gently remove the right faring molding. 2. Unscrew the bolt holding the right side faring key panel. 3. Open the right faring pocket with the key, remove the two screws and plastic pop rivets by pressing on their center posts then lift the pocket out of the way, but keep the cable attached. 4. Lift up on the right side of the keyed panel until it releases and pull out pannel. 5. Remove the C clip holding the cable to the back of the lock mechanism. 6. Turn this panel over and using a sharpie mark an X on the back of the raised square area where the voltmeter will mount. 7. Tap the center with a punch to start the pilot drill of a 2" hole saw. 8. Drill from the back the pilot hole. 9. Turn the panel over and drill out the hole carefully. The hole must be centered in the square area of the panel (Don't use the raised hole guide imprinted on the back of this pannel or the guage will not fit into the panel as it will not be centered enough to fit in.) 10. Use a dremmel (From the back side of the panel to sand out the hole until the guage fits in. 11. Take off the U shaped guage keeper. 12. Put the guage into the hole and position it so the word "Honda" is level on the bottom of the panel. 13. Hold while a helper wraps electrical tape around the guage several times to hold it to the panel. 14. Install the U shaped keeper and tighten the nut with a 11mm socket so the guage is secure on the panel and doesn't twist around. 15. Take the red plug out of the weather proof cover under the right pocket and plug it into the green plug from the voltmeter. 16. You may need to tuck the radiator hose down a little to make room for the installed guage. 17. Reinstall the cable to the back of the lock and secure it with the C clip. 18. Start the engine and test, it will take a minute or two for the guage to register a little obove 14 volts. 19. Reinstall the panel with the voltmeter installed, the right pocket and the fairing molding. 20. It took about 30 minutes feeling my way threw this installation and well worth it! "Make sure you select the guage for the 1800 when ordering as it has the correct plug already installed and it won't be necessary to run wires to the fuse block!" Good Luck! |