-
Universal Kickstand Extender
By Kuryakyn SKU: KU7109
- $60.79Save $3.20
MSRP: $63.99
-
-
-
Your Bike
Will this fit your bike?
-
Related Items
56 Member Reviews
1 Star: 15
2 Stars: 11
3 Stars: 8
4 Stars: 3
5 Stars: 19
Universal Kickstand Extender
ITEM CODE: KU7109, SKU: KU7109
11.16.2013
Kickstand Extender
Mine continued to loosen over and over again and after continued tightening of the BSCS allen head bolt it stripped. Went to the local ACE Hardware store and purchased the 1/4"-20 x 3/4" Chrome bolt but with the the Hex Head end. Able to securely tighten with a ratchet wrench--$2.50 fix! |
Universal Kickstand Extender
ITEM CODE: KU7109, SKU: KU7109
09.10.2013
Not so great
Does make access to the stand easier with floorboards, but mine kept coming loose - metal actually too soft and bent causing the first one to fall off going down the road. I know it sucks, but a dab of JB Weld on all contact points made the second one work for me - does drag with hard cornering... |
Universal Kickstand Extender
ITEM CODE: KU7109, SKU: KU7109
08.26.2013
will not lock into place
This kickstand extender drag on the ground when going around corners and leaves a sharp edge that can cut into your boots or leg if you are unlucky and the clamping system does not work comes loose all the time |
Universal Kickstand Extender
ITEM CODE: KU7109, SKU: KU7109
07.06.2013
Major Scraping
I bought the floorboards and heel/toes shifter kit from Kuryakyn along with the kickstand and extender. Floorboard great, kickstand great in keeping the bike more upright over the OEM, but the extender, disappointed. No matter how I position the extender, I scrape on normal cornering in town. I live in Colorado and take full advantage of our mountain roads. I have had this three days, and have started wearing down the extender lower corner. I scrape my floorboards when carving, with the extender, I scrape sooner and some of my reaction has been to back off my riding. Not going to happen. Not sure what to do short of removing it. |
Universal Kickstand Extender
ITEM CODE: KU7109, SKU: KU7109
03.06.2013
Update to Recent Review
This is an update to my review below since I’ve received a couple of requests to provide a picture of where I inserted the screw which corrected the issue of the Kickstand Extender coming loose . Here is a picture https://screencast.com/t/XoM0PQ8AYMe of the screw I inserted which will absolutely prevent the extender from moving from the position it is in when you insert the screw. I hope this helps. |
Universal Kickstand Extender
ITEM CODE: KU7109, SKU: KU7109
12.04.2012
Kickstand Extender Fix
Like many other reviewers I bought this because I have the Kuryakyn floorboards which I love but require a kickstand extender unless you want to lift the left floorboard to put the kickstand down. I read the reviews before buying and decided to do so based on the assumption I would apply the red Loctite. The Locktite worked for about 1,000 miles before the extended portion began to swivel. I was able to resolve the issue by drilling a hole through the area where the two pieces connect and then placing a screw into the hole. I drilled from underneath and was careful not to drill the entire way through to the top for aesthetic purposes. I then used a screw that was much longer than needed and cut it to be flush with the bottom of the extender after inserting it using Loctite. Since the screw head has been removed you can’t tell it is there unless you crawl under the bike and look closely. I now have over 15,000 miles without issue. I wouldn’t buy these again if there was another better option but I haven’t found one and was able to get these to work after about ½ hour of work. |
Universal Kickstand Extender
ITEM CODE: KU7109, SKU: KU7109
09.15.2012
kickstand extender
Will not stay tight unless it is shimmed |
Universal Kickstand Extender
ITEM CODE: KU7109, SKU: KU7109
08.19.2012
Kickstand Extender
I was a bit hesitant to order based on some of the reviews. I previously purchased Kuryakyn Kickstand #7104 and the floorboards and thought I would give this a try. It took just a couple of minutes to install and I am more than pleased. I had no problem with the bolts being too long or coming loose. The OEM kickstand on my bike was a bit samller diameter and I see where the extender would not tighten down as it should. |
Universal Kickstand Extender
ITEM CODE: KU7109, SKU: KU7109
06.06.2012
Disappointed
I bought this along with the new floorboards and heel/toes shifter kit from Kuryakyn. I am guilty of not reading the reviews prior to purchasing. As other purchasers have mentioned I am unable to tighten the screws enough to keep it from moving on the stand leg. I have removed it from my Goldwing and chocked it up to buyer beware. |
Universal Kickstand Extender
ITEM CODE: KU7109, SKU: KU7109
04.14.2012
Kickstand extender
I'm inclined to agree with most of the reviewers. Mine keeps coming loose too. I do like it and I am able to use it when it is tight without raising the floorboard. That I like. Maybe I will try the loctite and different screws. |
Universal Kickstand Extender
ITEM CODE: KU7109, SKU: KU7109
03.20.2012
Kick Stand Extender
WOW!!! The only time I didn't read a review before I bought some thing,and well This should of been the time I had. I gave this product 2 stars only because it looks nice.This product is junk. Don't waist your hard earned money on it. I have tryed every thing I could think of to keep this thing tight, besides welding it on to the Kick Stand. I removed it and just lift the floor board up to lower the Kick stand. Sorry Wing Stuff .....Not A Good Sell!!! |
Universal Kickstand Extender
ITEM CODE: KU7109, SKU: KU7109
02.27.2012
Kickstand Extender
After my first ride the unit loosened and I dragged it for a while. After I got home I used some red lock tight and that seemed to fix the problem. Now when driving on winding roads I scrap the extender. I like it but will eventually remove it. |