114 Member Reviews
1 Star: 5
2 Stars: 2
3 Stars: 4
4 Stars: 6
5 Stars: 97
Motorcycle Tire Ceramic Balancing Beads
ITEM CODE: PG27738
11.06.2013
The best balancing for the buck
I've been using these beads for six years, and well over 100K. I've never had a single problem, and they do exactly what they're advertised to do. I recommend them highly. |
Motorcycle Tire Ceramic Balancing Beads
ITEM CODE: PG27738
10.12.2013
Dyna Beads / Yes Yes Yes
I had friends tell me about these but I refused to try them, Well I broke down and gave these a try. Wow... Now I wish I had tried them earily. I thought I might notice a little differance in the ride but OMG... I didn't think it would be this Dang good. For the price you have got to give this a try. I will be using these from now own. I plan to start out the new tires with these beads. I love the way my bike rides now and it was so easy to do. Check out youtube on how to put them in and you just might see me doing it. |
Motorcycle Tire Ceramic Balancing Beads
ITEM CODE: PG27738
06.21.2013
Clarification on issue with loading the beads
This is not so much a review of the product but hopefully, useful information-- Some reviewers indicated that it's impossible to load these through the valve stem and most say no problem- as it turns out THEY ARE BOTH CORRECT. I had to opportunity to try and put these into a new tire/wheel (2008 stem) through the older style of valve stem while the wheel and tire were on the bench with complete control. There was nothing I could do to make them enter that way and trust me I tried everything- My brother has a new wing with the new aluminum block type valve stem. We easily put the beads in that while still on the bike no problem at all. I have yet to understand why that's true. I even tried to use only 1 bead drop it into the open stem shake and turn the tire to insure that it would enter- not even the single bead would enter the stem?? It makes me think there is some kind of filter screen behind the bend in the stem- yet I was able to push a small light wire tie all the way through stem?? Maybe this brings some understand to the contrast in reports on the use of this product?? |
Motorcycle Tire Ceramic Balancing Beads
ITEM CODE: PG27738
05.20.2013
reviews
i tested this product and found it to be a waste of money and it doesnt do any of what it says it does reading all the outher reviews i have come to the conclusion there are a lot of folks that dont want to admit the wasted there money |
Motorcycle Tire Ceramic Balancing Beads
ITEM CODE: PG27738
05.19.2013
Love them w/ Elite III's
Had these installed with new front tire and after 6000 plus good wear on tire with no chop. had new rear tire put on at shop and they had no dyna beads' bought some from Wingstuff and putting them in is a piece of cake with the application bottle. I used a dremel tool to apply constant vibration to valve stem and the beads just rolled right in, No problem. |
Motorcycle Tire Ceramic Balancing Beads
ITEM CODE: PG27738
03.27.2013
Don't even try to add these into the valve stem
This is impossible to put the beads into the valve stem as the instructons say. They would be better off makeing a Starch bag like the truck pouches are made and you just drop it in and the bag disolves and breaks apart. Never the less you have to get the things inside. My friend and I seated the bead on the tire Let all the air back out then Broke one side of the bead and basically squeezed the bottle and poured it into the tire. A mush better way to get it into the tire. As far as the proformance I think it has made a very noticable differance and the tires defentally feel more stable. Of course the roads we have make it dificullt to tell but the vibration is down considderablly. I don't know that I would put this in old used tires once there worn. I installed on both front and rear New tires. So far so good. |
Motorcycle Tire Ceramic Balancing Beads
ITEM CODE: PG27738
02.05.2013
Work Great
Bought these for my 2nd ride - Honda Valkyrie. Work great and definitely extend the life of my tires. |
Motorcycle Tire Ceramic Balancing Beads
ITEM CODE: PG27738
01.25.2013
Really don't know if the helped at all
After installing these and dealing with the eventual clogged valve in the stem, transfer to new tires, etc. I don't think there was a value add. I get 17K on my Elite 3s without these and didn't do any better with them |
Motorcycle Tire Ceramic Balancing Beads
ITEM CODE: PG27738
12.31.2012
Fantastic
Dyna beads made a very noticable difference on my 2001! Smoother ride, tires seem to be wearing better too! Istallation was kinda funky at first, you have to keep tapping the valve, they eventually drop in. I'm a believer! |
Motorcycle Tire Ceramic Balancing Beads
ITEM CODE: PG27738
09.30.2012
Dyna Beads
These were recommednded by the dealer shop foreman at my first tire change. I have the Dunlop Elite 3 tires front and back. I have 12K miles on them with more to go and they are always smooth riding. Great product |
Motorcycle Tire Ceramic Balancing Beads
ITEM CODE: PG27738
09.24.2012
I'm a Believer !!
I installed the Dyna Beads for the first time on a new set of tires before leaving on a 2700 mile road trip and all I can say is: I will never use wheel weights again! My wing has never felt so smooth and no more low speed wobble when coming to a stop. I put 2 oz. in front and 3 oz. in rear. After my return, I closely inspected the tires and see no early evidence of cupping what so ever. I am sold on these beads!! |
Motorcycle Tire Ceramic Balancing Beads
ITEM CODE: PG27738
08.23.2012
Great balancing alternative
I purchased them 2 years ago and installed them along with Elite III's. I am replacing both tires with almost 18,000 miles on them. The rear is becoming dry and the front still has probably 3,000 left, but I like to change tires at the same time. I have taken it multiple times from the first time of installation and a few time during at speeds up to 115 MPH and it drove like riding on glass. Bought them again with my new set. Will never traditional balance again. The benefits of always having your tires balanced it great. I saw one or 2 people say they did nothing. You need to make sure you put in the proper amount and use the valve stem with the built in non clog valve is you wish. Yes, Once in a while had the beads get caught in the stem, but all I had to do it pop a little air in the valve to dis-lodge and all was OK. |