-
Mini Arms for Ergo II Highway Footpegs
By Kuryakyn SKU: KU4071
- $75.59Save $8.40
MSRP: $83.99
-
-
-
Your Bike
Will this fit your bike?
-
Related Items
64 Member Reviews
1 Star: 0
2 Stars: 0
3 Stars: 4
4 Stars: 3
5 Stars: 57
Mini Arms for Ergo II Highway Footpegs
ITEM CODE: KU4071, SKU: KU4071
09.06.2008
5 Stars
I have the Ergo II pegs and the 6" arms would not position where I need them. I'm 6'2", and the original peg position was not right. Spoke to the fine people at Kuryakyn before ordering these, and they were real helpful, got an extra inch or so outboard (on each side) compared to the original arms. Great modification for me on my 08 Wing. |
Mini Arms for Ergo II Highway Footpegs
ITEM CODE: KU4071, SKU: KU4071
09.04.2008
5 Stars
I have the Ergo II lighted cruise boards. I had tried the 4 1/2" mounting arms but still had too little room to stretch out my legs. I too discovered the boards didn't bolt up properly to the arms due to the length of the adjuster. I cut a 3/8" length of 1/2" copper pipe for a bushing and it worked perfectly. |
Mini Arms for Ergo II Highway Footpegs
ITEM CODE: KU4071, SKU: KU4071
09.02.2008
5 Stars
I'm 6' tall with a 34" inseam and these made a big difference in comfort over the 6" bars that came with the Ergo II ISO pegs. If you have less then a 32" inseam these may be to short for you. To bad Kuryakyn doesn't give you a choice of bars when you order the pegs so you wouldn't have to pay extra for the shorter bars. |
Mini Arms for Ergo II Highway Footpegs
ITEM CODE: KU4071, SKU: KU4071
08.29.2008
5 Stars
Fit perfect. Good call to Michael's review below. One more thing, the washers must also be smaller OD than those supplied with the highway boards. |
Mini Arms for Ergo II Highway Footpegs
ITEM CODE: KU4071, SKU: KU4071
08.29.2008
5 Stars
Bought these for my father's 1800 and now he can stretch just like the ad says. A must if you're tall because the 4" and 6" bars are too much when you have to face them at you on that 1 inch section of the engine guard. |
Mini Arms for Ergo II Highway Footpegs
ITEM CODE: KU4071, SKU: KU4071
08.26.2008
5 Stars
A Perfect transition! Now I'm at the correct knee flex, comfortable, relaxed, and ready for the long haul again. |
Mini Arms for Ergo II Highway Footpegs
ITEM CODE: KU4071, SKU: KU4071
08.20.2008
5 Stars
Fit's Perfect with the Switchblade peg's #KU4064. This replaces the arm on the peg-mount and puts the peg further forward giving you the ability to extend your legs out more while maintaining the ability to rotate the peg to your desired position. Heavy piece and good chrome shine. |
Mini Arms for Ergo II Highway Footpegs
ITEM CODE: KU4071, SKU: KU4071
08.18.2008
5 Stars
These are great! I am 6'-3" and I am now able to stretch my legs out a lot more. I have the Kuryakyn highway boards which these are not designed to fit, however all that was required to make these work with my boards was to cut the existing sleeve and bolt that comes with the boards down about 5/16 of an inch. |
Mini Arms for Ergo II Highway Footpegs
ITEM CODE: KU4071, SKU: KU4071
08.02.2008
5 Stars
These work much better for stretching out my long legs. I also had to really crank down on the supplied bolts to get past the blue loctite. Overall though nice addition. |
Mini Arms for Ergo II Highway Footpegs
ITEM CODE: KU4071, SKU: KU4071
08.01.2008
5 Stars
They fit my Kuryakyn Gold Wing GL1800 Iso-Wing Adjustable Highway Boards (not sure if they are the same as the non-Iso-Wing boards). Becasue they have lock-tite on them, I did have to "crank" the bolts to get them past where the Lock-tite was applied. Could that be the issue others are facing with the bolts? Not sure . . . |
Mini Arms for Ergo II Highway Footpegs
ITEM CODE: KU4071, SKU: KU4071
07.29.2008
3 Stars
Exactly my problems. Bolts supplied do not fit my Ergo II unlighted Cruise Boards. Will also have to get a spacer. |
Mini Arms for Ergo II Highway Footpegs
ITEM CODE: KU4071, SKU: KU4071
07.28.2008
3 Stars
A word of warning - The supplied bolts WILL NOT fit the Ergo II unlighted Cruise Boards. I had to use the original bolts and install a 1/2" ID spacer from my local ACE Hardware to make them work. Aside from that and a lot of anticipation waiting for them to arrive, they work and look great! What a relief to be able to throw my legs out and not have them banging against the fairing or getting very warm against the valve covers! |