-
ISO-Grips Black for use w/OEM Heated Grips for GL1800
By Kuryakyn SKU: KU6383
- $121.49Save $13.50
MSRP: $134.99
-
-
-
Your Bike
Will this fit your bike?
-
Related Items
42 Member Reviews
1 Star: 5
2 Stars: 1
3 Stars: 8
4 Stars: 9
5 Stars: 19
ISO-Grips Black for use w/OEM Heated Grips for GL1800
ITEM CODE: KU6383, SKU: KU6383
02.27.2017
Right Fit
These are a great addition for holding on to the handlebars. My hands and forearms became cramp free with the installation. It was a challenge to install the grips on the handle bars but once on they looked fabulous. Two problems with the grips. First of all because of the thicker grips I do not feel any heat from the heated grips reach my hands. The second problem deals with the black covering peeling off. At least with the black color it is not that noticeable. I still recommend this product because of the comfort of the thicker grip. |
ISO-Grips Black for use w/OEM Heated Grips for GL1800
ITEM CODE: KU6383, SKU: KU6383
11.10.2016
Feels Great!!!
I added these to my 2012 to replace the foam grips I installed shortly after buying the bike. I had my concerns about these grips properly transferring the heat from the OEM grips, but they do a great job at transferring the heat to my hands. The installation was easy. I suggest using Windex liberally when sliding these grips over the OEM grips. The Windex will remain wet long enough for you to position the grips. The instructions suggest you wait a couple of hours after installing these before operating the motorcycle. This is to insure the new grips are dry and will not slide during operation, but you can shorten this time by using a heat gun after installation is complete to dry the Windex solution. I installed these with the Throttle master and colored rings to complete the look and comfort.The Grips and throttle master all come with the short and long screws needed for the install. Use a medium strength Lock tight (blue) on the screws. |
ISO-Grips Black for use w/OEM Heated Grips for GL1800
ITEM CODE: KU6383, SKU: KU6383
10.16.2016
What's the point part 3
OK....if you follow this around you'll see the point. First time i've ordered something from Kury that has failed so spectacularly. So I ordered the Black heated grip covers..figured I'd add the bar weights too...so...grips failed...therefore these extension rings failed and further more the weights were in turn useless. This was about the worst I've ever been stung for a waste of money. All told...over $125 for nothing. Total disappointment. I followed the instructions....fail....went to youtube...tried their fix of cutting the rubber in half and installing....falied....tried zip ties...tried lock wrench....tried vise grip....tried cinch rope....those little screws finally gave up the ghost...pressure way too high for grips anyway. Think they really ought to just stick to Foot pegs and "trinkets". This was a complete bust. Great looking idea...but...not happening. |
ISO-Grips Black for use w/OEM Heated Grips for GL1800
ITEM CODE: KU6383, SKU: KU6383
10.06.2016
Not as bad to install as I thought
I looked on Youtube and found a video that talked about using a very small amount of dish soap instead of the Windex. I then installed half of the clamp on and slid all that onto the grip. Then used zip ties to SLOWLY tighten and work the other half of the clam shell. Total time was about 40 minutes. They look and feel great. |
ISO-Grips Black for use w/OEM Heated Grips for GL1800
ITEM CODE: KU6383, SKU: KU6383
10.05.2016
Different methods to install
These things CAN be very difficult to install. I had a terrible time. I used the dog leash method, the zip ties method, and the channel lock pliers method. All failed. In fact, I broke both grips trying to get the clamshell-like pieces to snap together over each of my stock grips. I returned them and WingStuff gave me a second set for which I was very grateful. The second install attempt went much more smoothly because I tried a different method. I used the zip ties to slowly draw the clamshell pieces together and hold them as I squeezed them together as much as I could by hand. Then for the critical final closure event I used hose clamps with a cloth between the clamp and the grip so I wouldn't scratch it. I screwed the clamp down until the clamshell looked snug and I left it that way over night. Next day I removed the clamps and zip ties and the clamshells stayed shut. I'll let you know if they come apart. The grips are significantly fatter than a normal grip because they install on TOP of the stock grips. They really fill the hand. I also added the end weights, the required color ring, and a throttle boss type thing. |
ISO-Grips Black for use w/OEM Heated Grips for GL1800
ITEM CODE: KU6383, SKU: KU6383
08.17.2016
ISO grips
Very disappointed with these. While difficult to get on the real issue is that they hang up the throttle by pinching the heated grip on the end toward the switch housing. Struggled with these for two days and finally give in. Save yourself time, money and aggravation and buy some foam slip on grips. |
ISO-Grips Black for use w/OEM Heated Grips for GL1800
ITEM CODE: KU6383, SKU: KU6383
06.08.2016
Love the blacked out look!
Installed these on my F6B and full Gold Wing, the stock grips are too skinny for my hands. On the throttle side, watch the gap between the grip and the switch housing interface. Mine was too tight and the throttle hung up a bit. A small adjustment to the switch housing gap and all was well. The grips take a bit longer to warm up but after that they seem to work fine. Really like the appearance also, especially with the optional colored trim rings. |
ISO-Grips Black for use w/OEM Heated Grips for GL1800
ITEM CODE: KU6383, SKU: KU6383
05.16.2016
Not too bad to install
About 40 minutes to install both sides. Hardest part was getting the rubber sleeves in the right spot. Suggestion to make it really easy. Use a couple of small soft jaw grip clamps, and a dull plastic scrapper or wide flat blade screwdriver. Get the rubber in the slots and hooked on one side. Use the clamps to pull it down toward the grip, then use the scrapper to push the rubber into the other side of the slot. Repeat process for other half and use clamps to hold together to install screws. Hope these hold up better than the chrome version. I got about 4 years on them and they where in really bad shape. |
ISO-Grips Black for use w/OEM Heated Grips for GL1800
ITEM CODE: KU6383, SKU: KU6383
03.05.2016
Get a grip
These look as good as they feel. Install was quite a squeeze. |
ISO-Grips Black for use w/OEM Heated Grips for GL1800
ITEM CODE: KU6383, SKU: KU6383
02.07.2016
Nice look compared to the chrome
We had the chrome ones on the '08, and are trying to stay away from the chrome on this one. It works well in cross country, especially when it starts to rain or hail. The bigger radius is more comfortable than the skinny grips that are on the bike for the long haul. |
ISO-Grips Black for use w/OEM Heated Grips for GL1800
ITEM CODE: KU6383, SKU: KU6383
11.13.2015
Black Heated Grips
Ordered and installed these on my wing trike. So far they look good and work just fine as expected, simply meaning - I knew with radiant heat I'd have to turn the dial up one or two more notches. Not a problem though I can still get and feel the heat. When riding across country it's impossible to control the weather/temp. - my best use is during the rain. |
ISO-Grips Black for use w/OEM Heated Grips for GL1800
ITEM CODE: KU6383, SKU: KU6383
08.18.2015
grips
These are great - they do not fit like my Harley ones so take a second & look at the install pictures. Worth the money |