4/2/2014
Hopedale, MA
Works Great once installed
Since we had no communication set up for our Goldwing, we decided to try Bluetooth, so I purchased these 3 items; SMH10 Dual Pack, SM10 adapter, Goldwing 3.5mm to 5 pin cable. What we were looking for is intercom communication between driver and passenger, cell phone calls in and out, both GPS and Goldwing audio through the SM10 to both helmets. I was already aware about no CB but supposedly you can listen but not speak (don’t know). Downloading the firmware for both the SMH10 and the SM10 went well. Pairing the two head sets together and the cellphone went fine. Pairing the SM10 to the headsets didn’t go so well… the manual says the following: start with the SM10 and press the button for about 5 seconds until the blue light starts blinking, once that’s done, on a headset, push the jog dial for 5 seconds or so until you hear “that it’s pairingâ€, within 2 seconds press the phone button…. After 3 minutes nothing got paired. Saw a video showing how to pair the two items and it was different… do everything the same with the exception of hitting the phone button… the two paired together!!! The other headset do similar with the exception of the SM10 button is held for about nine seconds until the red light is flashing. Then do the same procedure with the 2nd headset again with the exception of pushing the phone button… and the headset paired! After pairing everything, it all worked. What is attached to the SM10 is the GPS and the Goldwing radio using the cable and that worked fine. Good clarity, good volume. Once completed installation…. Please how it works. Four stars because of the pairing instructions with the SM10.
24 out of 25 people found this helpful