- Your Price
- Item #:
This Fog Light Kit for GL1800 Goldwing includes all necessary wiring, lights and switches to mount to the GL1800 to provide the same quality level as OEM. Plugs into existing wire harness, no splicing required. Includes H3, 35W halogen lights. Glass lens measures 4" in diameter. Also available in a blue lens for better clarity.
I installed this light kit within an hour without any problems. All components included in the kit went in smoothly and work very well. Since the GL1800 is plug & play, all wiring is already there, you just need to find it and plug it in.
The lights work excellent and are very bright. They also are able to take some road abuse. I keep them on all the time I'm riding.
take the feed that goes to the lights and install it to the coil side of a relay. install a fused line from the battery to a open contact on the relay, on the other contact of the relay run to the two flood lights with the bulbs that have been changed to 55w. Now the light will come on and off from your dash switch stay on if low or high beam. When the bike is off the lights go off. You should run the negative side of the circuit from the battery as well.
I have been using my lights like this for ten years. Don't use the 55W bulbs without the relay because the stock switch can't take the amperage.
I wish they were a little brighter, but they work as advertised. I have had them about 2mo on my 2010 Goldwing, after my parts issue see my reviews below, put Wing called my personally to make sure I got what I needed. So I am happy with the price and the lights. Only suggestion would be brighter and trim the cowl after you see where it sits after lights are installed, I still need to do some trimming to get a full spread of light.
And we can't wait to show you how it's done!
Save on shipping! Will Call is available at our Southern California headquarters.