Fog Light Reconfiguration Harness

Electrical Connection

Fog Light Reconfiguration Harness
Your Price
$23.99
MSRP:
$28.99
Item #:
EC02303
23.99

Allows rider to use the fog lights on either high or low beam. Provides fuse protection for fog lights. Without this protection, a short in the fog lights will disable the speed sensor that feeds the cruise control and speedometer. Removes the load from switch. Installation takes less than 10 minutes and is "Plug & Play" and completely reversible. New relay included. Please check local laws in regards to use of this harness. For Big Bike and Hondaline fog lights.

12 Member Reviews

No_photo
8/11/2016
Bradley
Forney, TX
50_stars
Plug and Play

I wasn't sure if I had the correct brand of fog lights but I took the chance and it worked perfectly. Took less then 5 minutes to install. As a matted of fact, I had already spent $50+ at the shop replacing the old relay which is no longer needed. Wish I had know about this sooner.

Interestingly enough, with the old harness my fog lights only worked on high beams which is very odd. Nonetheless, this fixed the problem. I really wanted them for visibility, not functionality anyway, so high beams only was just not practical.

I'll update this review if it does not last.

Blessings.

1 out of 1 people found this helpful
yes no
 
Magick_image.php?path=uploads%2fupload_0000016034
2/9/2016
RICHARD
SANDY, UT
50_stars
still working

Bought this on 3/17/12 and promised I would update after I had owned it for a while. Still working good. No problems

2 out of 3 people found this helpful
yes no
 
Magick_image.php?path=uploads%2fupload_0001653561
7/12/2015
Steven
New Richmond, WI
50_stars
Love it!

Simple, easy WORKING upgrade to bikes lighting system.
Like they say, 'plug n play'. The longest part of the install was removing the box and air deflectors.
Works like a charm. Honda should've done this from the factory.

A must have upgrade!

2 out of 2 people found this helpful
yes no
 
No_photo
8/7/2014
AL
50_stars
Simple Install

Simple install, unplug two connectors, plug in two new connectors.

Hopefully, we are now a bit less "invisible".

Mike

2 out of 2 people found this helpful
yes no
 
Magick_image.php?path=uploads%2fupload_0001647446
7/1/2014
Dutch
MD
50_stars
Excellent!

This is a snap to install. For those of you who have radio controls on the left side fairing, after you remove the trim strip completely, remove all four of the 5mm hex head bolts (3 different lengths, so keep track) and pop out the radio. The fog light harness is underneath that. Remove old one and plug together the new one, turn on ignition and test….easy. No need to pop out the fairing pocket. I don't ride at night, so having six lights on in the daylight is a non-issue in Maryland and this was mainly installed for me to be seen, not for me to see, but I would imagine this mod would throw enough light at night to burn holes in the guys retinas in front of you...

8 out of 9 people found this helpful
yes no