Return to previous page You are here: Headsets & Electronics >> Kisan Electronics
Kisan Vectra Light LED Turn/Brake/Running
Brilliant LED Lighted License Plate Frame can be mounted with lighting up or down and fots any motorcycle. State of the art Sequential Turn Signal & Brake Light Modulator is brighter than any other offered before with advanced technology by Kisan.
Average rating of 
(1 reviews)
Proceed To Checkout »
Email to a Friend »
Additional Product Info
3 in 1 Feature is Sequential Turn Signal Right and Left LED arrays indicate sequential turn signals. These SUPERBRIGHT!! LEDs have a wide viewing angle of 180 degrees. They are sunlight readable, even from the adjascent lanes.
Brake Light Modulator featue a cluster (6) LEDs is magnified by an acrylic lens to broadcast the Deceleration Warning sequence. As soon as you tap the brakes, they modulate rapidly at first then slow down to a solid ON over a period of (4) seconds.
Running Lights are programable feature. For additional visibility, all LEDs stay ON at reduced intensity, but you can also turn this feature Off.
All electronics are encased in a scratch resistant polycarbonate housing and sealed for weather protection. Chrome License Plate Holder is die cast alloy for strength & durability. High gloss chrome finish is polished to perfection.
A sturdy backing plate & mounting hardware, also in chrome, are included. Designed to accept the most commonly used 7-1/2 license plates.
Draws very little current (1/10th of an AMP), so it does not interfere with integrated ABS or EVO brake systems. Requires taping in to turn signal & brake wires. All connectors are supplied.
VectraLIGHT LPC-16 can be mounted with the LED arrays on top or bottom of license plate.
Brake Light Modulator featue a cluster (6) LEDs is magnified by an acrylic lens to broadcast the Deceleration Warning sequence. As soon as you tap the brakes, they modulate rapidly at first then slow down to a solid ON over a period of (4) seconds.
Running Lights are programable feature. For additional visibility, all LEDs stay ON at reduced intensity, but you can also turn this feature Off.
All electronics are encased in a scratch resistant polycarbonate housing and sealed for weather protection. Chrome License Plate Holder is die cast alloy for strength & durability. High gloss chrome finish is polished to perfection.
A sturdy backing plate & mounting hardware, also in chrome, are included. Designed to accept the most commonly used 7-1/2 license plates.
Draws very little current (1/10th of an AMP), so it does not interfere with integrated ABS or EVO brake systems. Requires taping in to turn signal & brake wires. All connectors are supplied.
VectraLIGHT LPC-16 can be mounted with the LED arrays on top or bottom of license plate.
Product Reviews |
Click here to add your own product review |
   |
Rating:
It works okay, but The quality of the frame itself is cheesy. The frame needs to be slightly heavier and needs to be larger so the plate will fit properly.
|
