You are here: GL1800 Accessories >> Kuryakyn
Kuryakyn GL1800 LED Turn Signal Mirror Lights
LED Mirror Lights for GL1800 Goldwing are one of our most popular safety items that dress your bike up at the same time. These must be hard wired in unless you already have a Kuryakyn stealth side light kit installed that would make this plug-n-play. These look great.
Attaches to the edge of mirror glass, slim design does not interfere with viewable mirror surface. Brilliant amber LED lights help vehicles at your flank or blind spot notice turn signal activation. When the turn signals are not in use, they are nearly
invisible.
Also, the 01-09 GL1800 Adapter (Part# 607312P) is sold separately. Please select this item from the drop down menu above. You must buy this item if you have an 01-09 GL1800. You need 2 of these to operate correctly, and they are sold in quantities of 1.
Average rating of 
(39 reviews)
Proceed To Checkout »
Email to a Friend »
Additional Product Info
NOTE - If you have a 2006 or Newer GL1800 you will need to purchase the Plug Adapter (Part# 7300) shown at page bottom as Related Product sold separately.
Also, the 01-09 GL1800 Adapter (Part# 607312P) is sold separately. Please select this item from the drop down menu above. You must buy this item if you have an 01-09 GL1800. You need 2 of these to operate correctly, and they are sold in quantities of 1.
Related Products
|
| ||||
|
Product Reviews |
Click here to add your own product review |
   |
Rating:
It's all about being seen, Front,Back and Sides. You hardly notice them until you need to let someone know your intentions to turn. I'm happy with them. 
|
 |
Rating:
I’m giving this product a 4-star rating for a couple of reasons. But first the good. I liked the small design of the product and the final result is great. It’s actually designed to catch the attention of the cager next to you and I think it does a good job of that. The instructions are spot on and it installed exactly as described. I didn’t use the plug & play harness because I have no problem soldering. Plus it saved me $20 bucks. After splicing and soldering the wires I just taped them up with quality electrical tape. Now for a few gripes. No matter how much I cleaned the back of the mirror the double stick tape wouldn’t stick to the back of the mirror it kept coming off. I had to take a piece of sand paper and scuff up the plastic, which solved the problem. The second complaint is the cost. When you take it out of the box you’ll see what I mean. But as I’m quickly learning everything for a wing is overpriced. As a side note if you have Baker hand wings it makes installing a little more time consuming. Expect to put aside at least 30-45 minutes to install these. It states in the description that you need plug adapters @ $9.95 ea. You don’t need these if you solder the connections described in the installation manual. Good Luck. 
|
  |
Rating:
Very keen design and installed without too much trouble. Visibility is perfect at the angles where you want people to be able to see them, and the added shield to keep them from blinding the driver is nice engineering foresight.
I had to cut the plug off and solder the wires in place on my Wing because I didn't have the other Kuryakin kit that was mentioned in the instructions. The included 1-inch of shrink tubing was a nice touch and made finishing the project easier, but it was not mentioned in the instructions. I bet some people don't realize what it's there for. |
 |
Rating:
I had these installed when I bought my 1800 last August. I really like them. Could they be more visible? Sure. But hey, if it allows the folks driving near you in a cage to know what you are up to, it has to make your riding experience safer!
|
 |
Rating:
Awesome product and looks great. Installation was not as straight forward as the instructions. I had to completely remove my mirror housing. Installation took me about 90 minutes, but I also installed the stealth II side lights which are also awesome
|
