Showing Results 1 - 6 of 6
Product Reviews by GREGORY
 |
Rating:
Love them. You can really notice that people are seeing you and not pulling out in front of you. Not too hard to install, took about an hour, but I did a set before. Do not know it you need the LED over the other ones. Use a dremel if you have one. Take your time and cut very slowly and carefully. Then use 220 sand paper on the nubs and the fairing will look perfect. Definitely would not use snips like the directions say, but if you do, leave a little of the nub and then sand smooth. 
|
 |
Rating:
Love these floorboards. However only 4 stars because finish is not perfect, and for this price they should be. After installation the toe heal shifter would not return to the middle position. Not good. Turned out to be the plastic part that kuryakyn has you put on the stock shift rod. I took it off and left the stock rubber piece on it. It now works perfect. I called kuryakyn and they said not to do this even thought the picture on the box shows the stock rubber. He said it would setup a wear pattern in the rubber and could cause binding. I am going to leave it the way it is now and just monitor it. I have a 11 1/2 boot and have no problem at all with my foot fitting. My local honda dealer said that the only transmissions they have had to rebuild was the ones with the kuryakyn floorboards. I asked if I should take them off, and he said no, just be sure not to let your boot ride the shifter, and if you do have a warranty claim, take them off. Honda is asking for pictures to see if the boards are on. Still love them 
|
 |
Rating:
Love them. Took some time to get the position right. I am 6'2" and tried the furthest and level position, but I was always worried that I would scrap the pegs, and my legs were burning from the cylinder heads. Tried a higher position and my legs were bent a little, but I did not have to worry at all about dragging the pegs. My legs are further apart now but I prefer this position. Don't locktight the bolts until absolutley sure of the position you want.
|
 |
Rating:
Great piece of chrome. Very nice finish and appears to be very strong. Easy to install. Use a electical tie strap for the spring.
|
 |
Rating:
Nice product, but only 4 stars because left floorboard was machined with the wrong tolerance and would not accept the ball and spring under any condition. The transformer interfered with the board. Finish is not perfect, but good. Wingstuff took care of the problem immediately.
|
 |
Rating:
Great belly pan for the money. Very small dent, but who cares its on the bottom of the bike. The front piece was a little loose and caused a dull vibration in my floorboards, so I removed the front section and bent the pan along the crease to put more tention on the front, and it worked perfect. Don't let this stop you from buying, no big deal.
|
