Alias:
Bill
About:
- Nothing entered yet -
Occupation:
- Nothing entered yet -
Favorite Quote:
- Nothing entered yet -
Member Since:
07.08.2011
Bike 1:
White 2000 Honda G W
Bike 2:
Titanium 2002 Honda G W
Bike 3:
Red 2003 Honda GW Trike
Bill has not yet added any pictures.
Bill has not yet written any comments.
Performance Stainless Belly Pan
ITEM CODE: WS187416, SKU: WS187416
06.29.2015
Need for Belly Pan
As an amendment to my 6/22/15 review on this product, my reason for purchasing a belly pan was a rock was propelled off the front tire and punctured a hole in the plastic coolant tank, causing loss off all fluid in the plastic tank. |
Performance Stainless Belly Pan
ITEM CODE: WS187416, SKU: WS187416
06.22.2015
1800 Stainless Steel Belly Pan
This manufacturer has made the unit with 2-horizontal slots on each of the belly pan sides, to place over the 2-lower rear cowl bolts. This requires complete removal of the 2-cowl nuts in order to get the sides of the belly pan horizontal slot over the cowl bolts. This can only be accomplished after removal of the 2-cowl nuts and pulling out the lower rear cowl off the bolts. Other manufacturers have a vertical slot that enables pushing the sides of the belly pan over the 2-lower cowl bolts and thus the nuts are not completely removed. In my installation effort, after removing the two nuts and pulling the lower cowl off the bolts, I was able to get the front lower cowl bolt hole back on the bolt, but not the rear one. It would not line up no matter how much tugging and pulling I tried. To facilitate a simpler installation I ultimately used a metal grinder to make a vertical slot into the original horizontal slot, as done by other manufacturers, so I could slide the pan sides directly over the 2-bolts. After numerous attempts to get the rear cowl bolt hole back over the rear bolt I finally had to jury rig a ratchet come-along between the front hole and the rear saddle guard, to pull the lower cowl rear ward to match the bolt with the lower cowl mounting hole. To simplify the installation grind a vertical slot into the manufacturers horizontal slot and only loosen the lower cowl nuts. Absolutely do not remove the nuts. |
Bill does not have any wish lists.