Contact Us
christopher
strawberry plains, TN, US, 37871
Reviews
Comments
Wish Lists
Alias:
christopher
About:
- Nothing entered yet -
Occupation:
- Nothing entered yet -
Favorite Quote:
- Nothing entered yet -
Member Since:
06.11.2014
Bike 1:
Titaninum 2006 Honda GL1800
Bike 2:
- No Bike 2 -
Bike 3:
- No Bike 3 -
christopher has not yet added any pictures.
christopher has not yet written any comments.
Deluxe Grey Half Cover for Goldwing
ITEM CODE: WSHALFGR, SKU: WSHALFGR
05.27.2018
I can sum it up in two words, "worthless junk"
| I went to Myrtle Beach for bike week, which was nothing but rain. I used this cover for the 1st time. I put it on the bike for three days. 1st it's not even close to being rain resistant, here is what else I found when I took it off: Even though it allows the rain to go through it, it stops the driving rain and the bike was wet but not soaked. The worst part of was all was the cotton undersides for the trunk and windshield was nothing but mold. After looking at the cleaning instructions it cannot go into a washing machine and so it looks like this cover did not even last three days!!! |
ITEM: PG34254
08.03.2016
Stay away from Windbender
| What a nightmare I had with my order I placed for a Windbender windshield. First I place the order and the windshield comes in with nice scratches in both top and base windshield. So I send them back and Dayle sends me a new set. OK, I start the install and find out the slots don't line up on the bike. I could bow the shield to get the hardware started but then had a big gap on the dash side because the shield was bowed out. I then took some measurements and with the oversize mounting slots in the Windbender going centerline to centerline of the slots they were over 8mm wider than the OEM shield. So now I have wasted almost 2 weeks and do not have a good windshield to put on the bike. I contacted Dayle and sent him the pic's, after some back and forth I found out that a 3rd replacement shield would have the same mounting problem so I ordered Klock Works shield and being the Windbender shield would not fit "correctly" I wanted a return shipping label. His answer was he would refund my money but no he would not pay for shipping because he did not feel it was a defective part. Here are the answers I got back from him as to why he did not feel it was defective: No one else has ever complained. The next two replies being I have been a Tool & Die maker for over 40 year blew me away; Maybe the windshield mounts on the Gold Wing are off. (realy!!!!) I never said the windshield was a perfect fit. ( being off 1mm or 2mm I would consider not a perfect fit, 8mm over 5/16 of an inch is defective all day long). After I spent $29 returning the shield (oh by the way I also sent back a lock spring assembly I completed that he charges $40 to do) Here is a reply from him on the credit he sent me: I installed a shield yesterday and took another look at that fit issue. "I’m going to move the outside slots in a few millimeters on the next run." If you want quality stay away from Windbender and look elsewhere for windshields it cost me time and money to learn this. |
christopher does not have any wish lists.